Extended Configuration Codes

Listed below is the full set of Extended Configuration codes. For instructions on using these codes, see the chapter called "Entering Extended Configuration Mode".

Code:	Use to:
	Specify the duration of 100% Free Mode.
	Select language of voice prompts.
	Specify number of redial attempts when trying to reach your ISP.
	Define additional area for the connection of the number kiosk (France only) or access number of the first ISP that you will configure.
	Specify the dial prefix that must be entered to get an outside line.
	Enable use of the dial prefix specified using code 10.
	Enable Call Waiting (code not used in U.S. or Canada).
	Disable Call Waiting.
	Verify usage of codes 12 and/or 13.
	Specify whether the Aplio/Phone uses configuration information for your primary or secondary ISP.
	Enter the Internet access number of your secondary ISP.
	Enter the user name that you use for your secondary ISP.
	Enter the password that you use for your secondary ISP.
	Enter the Internet Access Type of your secondary ISP.
	Define additional area for the connection of the number kiosk (France only) or access number of the secondary ISP that you will configure.
	Enter a back-up Internet access number for your primary ISP.
	Enter a back-up Internet access number for your secondary ISP.
	Define the number of rings for the Wakeup Call.
	Define duration of the connection after a Wakeup Call.
	Obtain Aplio/Phone version identification.
	Obtain Aplio/Phone serial number (Aplio ID) information.
	Disable error correction.
	Enable error correction.
	Upgrade Aplio/Phone